Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re[3]: WD - 1 1/8 " plywood pressure treatment

[Subject Prev][Subject Next][Thread Prev][Thread Next]
     If that doesn't do the trick, you could try one of these:
        American Wood Preservers Association, Washington, DC
        American Wood Preservers Bureau, Arlington, VA
        American wood Preservers Institute, McLean, VA
        Society of American Wood Preservers, Inc., Arlington, VA
     I don't know if all of these are still in existence, but you may find 
     a good lead.
     Ed Haninger
     Fluor Daniel 

______________________________ Reply Separator 
Subject: Re[2]: WD - 1 1/8 " plywood pressure treatment
Author:  John.Hubert(--nospam--at) at FDINET
Date:    8/1/97 8:14 AM

You may want to try speaking with Dennis Haywood of the Western Wood 
Institute at 360-693-9958.
John Hubert
______________________________ Reply Separator 
Subject: Re: WD - 1 1/8 " plywood pressure treatment 
Author:  gatensby(--nospam--at) at Internet
Date:    8/1/97 3:17
>I am working on a school project which will be using 1 1/8" pressure 
>treated plywood.  The project architect wonders if DSA or the School 
>Districts will be concerned about VOC or "Off Gasing" of the plywood due 
>to the chemicals used to treat the plywood.  Does anyone have a response 
>to this question?  The Architect has been trying to contact APA with no 
>success and I said that I may have more luck posting the question here.