Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Fiberglass, Structural Shapes, Properties, Costs

[Subject Prev][Subject Next][Thread Prev][Thread Next]
On 12 Sep 97 at 17:59, Horning, Dick/CVO wrote:

> From:          "Horning, Dick/CVO" <dhorning(--nospam--at)CH2M.com>
> To:            "'seaoc(--nospam--at)seaoc.org'" <seaoc(--nospam--at)seaoc.org>
> Subject:       RE: Fiberglass, Structural Shapes, Properties, Costs
> Date:          Fri, 12 Sep 1997 17:59:41 -0600
> Reply-to:      seaoc(--nospam--at)seaoc.org

> Ask Strongwell (nee Morrison Molded Fiberglass Co.) for their Extren
> Design Manual.  Or try their website.  It used to be
> http://www.mmfg.com, by now they may have changed "mmfg" to
> "strongwell".
> 
> > ----------
> > From: 	Stewart, Warren[SMTP:wstewart(--nospam--at)frharris.com]
> > Sent: 	Friday, September 12, 1997 4:44 PM
> > To: 	'Seaoc - Send to mail list'
> > Subject: 	Fiberglass, Structural Shapes, Properties, Costs
> > 
> > I need information on available fiberglass structrual shapes
> > (panels, I-beams, tubes, etc), producers of same, design criteria
> > and costs. Looking at 16 foot long beams spanning 4 to 5 feet
> > (i.e., continuous spans), up to 12 or 18 inches deep, and carrying
> > about 2 to 3 kips per foot (heavy loads).  Anybody has recent
> > experience or can point me in right direction?  Thanks
> > 
> > Warren Stewart, SE
> > Frederic R. Harris, Inc.
> > 
> > 

Warren,

You may also wish to contact Fibergrate Corp. in Dallas, Texas
(1-800-527-4043) and request a copy of their "Dynaform Fiberglass
Structural Shapes" manual.

Best Regards,
Jeff

Jeff Phillips
Structural Designer
Fluor Daniel Wright Ltd.
1075 West Georgia Street, Suite 500,
Vancouver, B.C.  V6E 4M7
voice:  (604)488-2274
fax:    (604)488-0582
e-mail: jphillips(--nospam--at)fdva.com