Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: SEAOC CAD STANDARDS

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I guess I don't have "all the utilities" loaded (I'm not sure why I would if
I didn't). I am running on a P150 with Win95. I get a command prompt in 15
seconds.

Regards,
Bill Allen

BTW, R14 ships with VBA.
-----Original Message-----
From: Damir Varevac <dvarevac(--nospam--at)gfos.hr>
To: seaoc(--nospam--at)seaoc.org <seaoc(--nospam--at)seaoc.org>
Date: Tuesday, October 28, 1997 2:07 PM
Subject: Re: SEAOC CAD STANDARDS


>>
>> But, let me guess, you stopped at R12 (dos), right?
>> You should see a R14 demo - requires Win95 or NT :o(
>> or at least see the platform/version performance tests in
>> last month's Cadalyst magazine. R14 on a Pentium Pro or II
>> is pretty "wowie-zowie" compared to a DOS version running
>> on a mere Pentium.
>>
>> Regards,
>> Bill Allen
>
>I have R14 installed and I am fascinated. I run it on Pentium 166, 64 MB
RAM
>and NT 4.0. All below that configuration will send you to the long lunch
>break before R14 loads all utilities. Command line is very useful, and I
>agree that is much easier to type the command (full or shortcuts) than to
>find button. And one more extremly useful improvemant: easy use of the true
>Type fonts.
>
>Regards,
>Damir Varevac
>
>
>
>