Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: AutoCAD R14 Tip

[Subject Prev][Subject Next][Thread Prev][Thread Next]
"W" might be a Softdesk command. It works the way Dennis described it when
I'm in the Softdesk environment.

Regards,
Bill Allen

----------
From: Mark Middlebrook <markmid(--nospam--at)pacbell.net>
To: 'SEAOC List' <seaoc(--nospam--at)seaoc.org>
Subject: RE: AutoCAD R14 Tip
Date: Wednesday, February 18, 1998 7:29 AM

Dennis:

>> I found this one on the Autodesk web site. If you use the "W" shortcut
command within AutoCAD, you will be able to save objects from your drawing
to a separate file (create details). <<

I'm not sure what command you're talking about. In the default R14 Acad.pgp
file, W runs the WBLOCK command:

W,         *WBLOCK

There's also the BLOCK command (Acad.pgp alias = -B) and an AutoLISP
program called BMAKE (alias = B), but both of these create a block
definition in the current drawing, rather than write it out to a separate
DWG file.



>> This is similar to Wblock except (and a big exception) you can bypass
the block command and go straight to saving the chosen objects to your hard
drive. <<

The WBLOCK command has always allowed you to bypass the BLOCK command.

Command: WBLOCK
[Specify new DWG file name in dialog]
Block name: [press ENTER to skip specifying an existing block name]
Insertion base point: [pick point]
Select objects: [do so]

>> The final advantage to this is that it will automatically save a
thumbnail drawing which Wblock does not do. <<

WBLOCK saves a thumbnail on my system.

>> The objects are saved as blocks and also wblocks. <<

The WBLOCK command creates a new DWG file out of the objects, but does not
create a block definition in the current drawing. If you insert the new DWG
file back into the current drawing, then AutoCAD creates the block
definition in that drawing.

- Mark Middlebrook



----------