Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: AUTOCAD To MICROSTATION

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Bentley Software makes/publishes Microstation.  They split with
Intergraph a few years back.

cmd

-----Original Message-----
From: Dennis S. Wish <wish(--nospam--at)cwia.com>
To: seaoc(--nospam--at)seaoc.org <seaoc(--nospam--at)seaoc.org>
Date: 07 June, 1998 3:44 PM
Subject: RE: AUTOCAD To MICROSTATION


>I found that some programs strip out the Autocad R14 hatch pattern
and
>replace it when converting back. I believe that this is true of
either
>Intergraph's Imangineer Technical or Visio's Intellicad. You might
find
>Microstation doing the same thing. I don't remember who owns
Microstation,
>but it occurs to me that it might be Intergraph. There should be
something
>in their help files to explain this.
>You might also try exploding the hatch pattern since it then becomes
>integrated into the drawings.
>
>Dennis Wish PE
>
>-----Original Message-----
>From: TahirQ(--nospam--at)aol.com [mailto:TahirQ(--nospam--at)aol.com]
>Sent: Saturday, June 06, 1998 8:32 PM
>To: seaoc(--nospam--at)seaoc.org
>Subject: AUTOCAD To MICROSTATION
>
>
>FELLOWS:
>I loose HATCHING from my drawings when I open or import AUTOCAD(R14)
>drawings
>into MICROSTATION(SE), everything else seems to work except
>HATCHING/PATERRENING.
>Any ideas how to deal with this.
>
>Tahir
>
>
>
>
>
>