Need a book? Engineering books recommendations...
Cold-Formed Steel Design Seminar[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: seaint(--nospam--at)seaint.org
- Subject: Cold-Formed Steel Design Seminar
- From: <LGSEA(--nospam--at)aol.com>
- Date: Fri, 17 Jul 1998 07:35:37 EDT
The Light Gauge Steel Engineers Association and American Iron & Steel Institute (AISI) present a continuing educational program offering an industry-approved approach to cold-formed steel design. This six-hour seminar is specifically tailored to design engineers, engineering students and professors, and anyone involved in the design of cold-formed steel structures. WHEN: Offered on Two Days: July 24, Friday Or July 25, Saturday 8 a.m. To 4 p.m. Registration begins at 7:30 a.m. WHERE: TRAINING CENTER Simpson Strong-Tie Company 1470 Doolittle Drive San Leandro, CA OTHER SITES IN 1998: Orlando (August 14 and 15), San Diego (October 23 and 24), Atlanta (November 20 and 21), Nashville (December 18 and 19). Also: Chicago (January 1999). CONTENT The seminar teaches how to design with cold-formed steel and how to use the AISI (American Iron & Steel Institute) 1996 Specification for the Design of Cold-Formed Steel Structural Members and 1996 Cold-Formed Design Manual. It explains the fundamental behavior of cold-formed steel structural members, design requirements, and cold-formed steel applications, including: Tension Members, Elements and Behavior, Members in Bending, Columns and Beam-Columns, Member Bracing, Connections and Joints, Testing for Special Cases, Light Gauge Steel Framing. CEU CREDITS Attendees will be awarded 0.6 Continuing Education Units for the seminar. INSTRUCTORS Dr. Roger A. LaBoube, Professor Department of Civil Engineering University of Missouri/Rolla Associate Director Center for Cold-formed Steel Structures Dr. Reinhold Schuster,Professor Department of Civil Engineering University of Waterloo, Ontario COST: $200 LGSEA Member rate: $175 TO REGISTER, Call: (615) 279-9251 or e-mail: LGSEA(--nospam--at)AOL.com (please include your phone/fax number) Seats are limited! Please register by July 22, 1998 for the San Francisco/Bay Area Seminar.
- Prev by Subject: Re: Cold-Formed Steel Design by Wei-Wen Yu
- Next by Subject: Colorado Engineering
- Previous by thread: Test 2 Please Delete
- Next by thread: fluff