Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Year 2000 computer problem!

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Did you try to install again the software which didn't work, after 
seting manually the date to 2000? I would like to know if it would be 
different! 

----Original Message Follows----
Date: 31 Aug 98 10:15:11 -0400
From: "Bill Sherman" <SHERMANWC(--nospam--at)cdm.com>
To: seaint(--nospam--at)seaint.org
Subject: Re: Year 2000 computer problem!
Reply-To:seaint(--nospam--at)seaint.org

I think the Year 2000 problem is quite real.  I downloaded a program 
from a 
Y2K web page which runs some tests on your PC to see if it is Y2K 
compliant.
 
Even though my computer clock allows showing dates beyond the year 2000, 
the=
 
software said my BIOS failed some portions of the test.  Then after the
test, 
my tape backup system didn't work and I had to reload the software.   
 
So then I backed up my complete hard drive and tried my own test, by 
simply 
setting the year ahead to 2000 via the Windows 95 time/date settings.  
Then
I 
tried to run various software on my PC - none of the programs which use 
my 
modem could "find" my modem and again my Ditto tape drive could not be 
"found".  After changing the year back to 1998, my modem software worked
okay, 
but again I had to reload the tape backup software.   
 
Some of the Y2K web sites have numerous examples of actual problems 
which
have 
occurred due to entering of future dates beyond 2000 or due to entering
dates 
from the 1890's (100-year old hospital patients), which created computer 
problems.  And there are examples of problems which could occur in 
equipment=
 
run by computer chips - some equipment may automatically shut down if it 
has
a 
maintenance scheduling program and if it reads the year "00" as overdue 
maintenance.  For example, elevators could shut down if the computer 
thinks
it 
has not been maintained properly.   
 
My employer has developed a Y2K policy statement and is taking it 
seriously.
 
Most large utilities are taking it seriously.  But even if the large
electric 
utilities do all they can, can they really protect themselves from a
shutdown? 
 A few years ago, much of the Rocky Mountain region had a large power 
outage=
 
due to failure of a single piece of equipment.  So if even one utility
misses 
a fix, can the whole power grid be impacted?   
 
I think the problem affects both large and small systems.  If you have 
only 
new software on a new computer system, your system may survive - but I 
think=
 
everyone will be inconvenienced in some way when 2000 rolls around.  If 
you 
"stick your head in the sand" and ignore the problem, you are more 
likely to 
have an unforeseen problem.  I plan to be prepared.   
 






______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com