Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Two way slab designed as one way

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Rjendran,

Thank for your response.

A Steeldeck is just thick gauge steel sheet  bent in such a way to
serves as steel reinforcement(one-way) as well as  bottom form for the slab.

Alex C. Nacionales,C.E.


-----Original Message-----
From:	P.Rajendran [mailto:rajendra(--nospam--at)edumaster.net]
Sent:	Wednesday, October 14, 1998 7:06 PM
To:	seaint(--nospam--at)seaint.org
Subject:	Re: Two way slab designed as one way

This will work, because this is a totally different structure compared
to a two-way slab. There is no continuity in long direction. No negative
moment reinforcement required in long direction.  However, while
designing the precast strip for flexure, make sure it has enough
rigidity to limit deflection. The topping on the precast strips is
flexible and will deform to conform to the performance of the strips
beneath it. Thus, if deflection is not controlled, the topping may
suffer unsightly cracks.

I don't understand what you mean by "slab with steel decking"?

Rajendran

Alex C. Nacionales wrote:
>
> Thank you for your response.
>
> What if I use well designed concrete precast strips of  12"  on the
> short direction and provide 1.5" topping. Is this a bad idea?
>
> How about slabs with steeldecking? How much negative reinforcement
> will be needed in the long direction?
>
>
>
>
> Alex C. Nacionales, C.E.
> A.C. Nacionales Construction.
>