Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Old Timers - 18B35 section properties

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Anybody who likes Jimi Hendrix can't be all bad. The good part about
there being no gas gauge in the bug is it was always easy to push!

                        Monte Griffiths, S.E.

> ----------
> From: 	Harold Sprague[SMTP:harold.sprague(--nospam--at)neenan.com]
> Reply To: 	seaint(--nospam--at)seaint.org
> Sent: 	Friday, February 19, 1999 9:08 AM
> To: 	'seaint(--nospam--at)seaint.org'
> Subject: 	RE: Old Timers - 18B35 section properties
> 
> Glenn,
>  
> Back when I was a mere lad, sometime in the late 60's (when I was
> known as
> "Dances with Iron", cerebral neurons were expendable,  and Jimi
> Hendrix
> blasted from my 8 track in my '61 Volkswagen bug), Pages 1-22 and 1-23
> of
> the sixth edition were updated by Bethlehem.
>  
> The 18B35 is listed as A=10.30 in2; Ix=512.3 in4; Sx=57.9 in3
>  
> Forgive my waxing nostalgic.... there was no fuel gauge on the '61
> bug.
>  
> Regards, 
> Harold Sprague, "Old Timer" 
>  
> Disclaimer:  "My opinions don't necessarily reflect reality"
>  
> 
> -----Original Message-----
> From: Glenn Otto [mailto:glenn.liberty.engineering(--nospam--at)worldnet.att.net]
> Sent: Friday, February 19, 1999 9:39 AM
> To: seaint(--nospam--at)seaint.org
> Subject: Old Timers - 18B35 section properties
> 
> 
> I have a beam designated on some plans from 1966 as "18B35".  My AISC
> 6th
> Edition only goes up to 16" light(weight) beams.  Do any of you old
> timers
> have some Bethlehem, USS, Carnegie, etc. steel books that contain that
> size?  I would appreciate if someone could supply the section
> properties (A,
> I, S ).  Thanks in advance.
>  
> Disclaimer:  "My opinions don't necessarily reflect those of the
> corporate
> entity"
> 
> 
> 
>