Need a book? Engineering books recommendations...
RE: Interference-Body Bolts[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: "'seaint(--nospam--at)seaint.org'" <seaint(--nospam--at)seaint.org>
- Subject: RE: Interference-Body Bolts
- From: Harold Sprague <harold.sprague(--nospam--at)neenan.com>
- Date: Fri, 5 Mar 1999 11:35:56 -0700
Interference body bolts are a general category of bolts first developed as a rivet replacement for structural steel. They had upset ridges that allowed them to be cold driven into a connection hole without damaging the threads. They would fit tight and not allow the connection to slip. They were generally button headed to allow driving. They usually met A325 requirements, and most had self locking nuts. Some of the manufacturers and names included: 1. Dardelet Rivet Bolt 2. Anco by Automatic Nut Co., Lebanon, PA 3. Bethlehem interference-body bolts, by Bethlehem Steel I believe that Bethlehem bought Dardelet or had an alliance to market their bolts. Regards, Harold Sprague The Neenan Company -----Original Message----- From: RainCat1(--nospam--at)aol.com [mailto:RainCat1(--nospam--at)aol.com] Sent: Friday, March 05, 1999 10:33 AM To: seaint(--nospam--at)seaint.org Subject: Interference-Body Bolts Anybody knows what Interference-Body Bolt is? Thanks a lot! Rainier Catubig, P.E.
- Prev by Subject: Re: Interference-Body Bolts
- Next by Subject: International Summit - Humor
- Previous by thread: Re: Interference-Body Bolts
- Next by thread: Vendors for Wood Design and Analysis Seminar