Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: SSPC SP3

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Check out: http://www.corrosion.com/prep.html

SSPC-SP-3
St 3
Power Tool Cleaning - Removal of all rust scale, mill scale, loose paint,
and loose rust to the degree specified by power wire brushes, power impact
tools, power grinders, power sanders or by a combination of these methods.
The substrate should have a pronounced metallic sheen and also be free of
oil, grease, dirt, soil, salts and other contaminants. Surface should not be
buffed or polished smooth.

Regards,
Harold Sprague
The Neenan Company


-----Original Message-----
From: Scott Maxwell [mailto:smaxwell(--nospam--at)engin.umich.edu]
Sent: Thursday, September 30, 1999 3:07 PM
To: seaint(--nospam--at)seaint.org
Subject: SSPC SP3


Can anyone give a (short) description of what SSPC SP3 requires?

Thanks,

Scott

------------------------------------------
Scott E. Maxwell, PE
Structural Engineer

SHG Inc.
500 Griswold, Suite 500
Detroit, MI  48226

Phone: (313) 442-8254
Fax:   (313) 442-8297

Work Email:     smaxwell(--nospam--at)dt.smithgroup.com
Personal Email: smaxwell(--nospam--at)engin.umich.edu
------------------------------------------