Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: SSPC SP3

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Harold,

Thanks much!

Scott

At 03:31 PM 9/30/99 -0600, you wrote:
>Check out: http://www.corrosion.com/prep.html
>
>SSPC-SP-3
>St 3
>Power Tool Cleaning - Removal of all rust scale, mill scale, loose paint,
>and loose rust to the degree specified by power wire brushes, power impact
>tools, power grinders, power sanders or by a combination of these methods.
>The substrate should have a pronounced metallic sheen and also be free of
>oil, grease, dirt, soil, salts and other contaminants. Surface should not be
>buffed or polished smooth.
>
>Regards,
>Harold Sprague
>The Neenan Company
>
>
>-----Original Message-----
>From: Scott Maxwell [mailto:smaxwell(--nospam--at)engin.umich.edu]
>Sent: Thursday, September 30, 1999 3:07 PM
>To: seaint(--nospam--at)seaint.org
>Subject: SSPC SP3
>
>
>Can anyone give a (short) description of what SSPC SP3 requires?
>
>Thanks,
>
>Scott
>
>------------------------------------------
>Scott E. Maxwell, PE
>Structural Engineer
>
>SHG Inc.
>500 Griswold, Suite 500
>Detroit, MI  48226
>
>Phone: (313) 442-8254
>Fax:   (313) 442-8297
>
>Work Email:     smaxwell(--nospam--at)dt.smithgroup.com
>Personal Email: smaxwell(--nospam--at)engin.umich.edu
>------------------------------------------
>
>