Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Vehicular Crash Barriers

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Greetings,

Thank you all for your replies. Since I dont have the mentioned standards,
my question is whether a so called "P2 type crash barrier" is mentioned in
the above standards or not.

Regards

Hasan Hindawi

----- Original Message -----
From: <hmorera(--nospam--at)Ammann-Whitney.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Monday, 04 October, 1999 9:59 PM
Subject: RE: Vehicular Crash Barriers


>
>
> Al,
>
> Also, depending on its location/usage, the crash barrier may have to
conform
> with NCHRP (National Cooperative Highway Research Program) Report 350,
> "Recommended Procedures for the Safety Performance Evaluation of Highway
> Features".
>
> This publication can be acquired from the Transportation Research Board -
> National Research Council in D.C.  Last time I looked, the report was out
of
> print.  If you find out you need a copy and can't get it, please drop me
an
> email privately.  I'll copy it and send it to you.
>
> Hector
>
>
>
>
>
>
> "Olive, Harry" <HOlive(--nospam--at)ngl.ca> on 10/04/99 12:03:41 PM
>
> Please respond to seaint(--nospam--at)seaint.org
>
> To:   "'seaint(--nospam--at)seaint.org'" <seaint(--nospam--at)seaint.org>
> cc:    (bcc: Hector Morera/NYC/AmmannWhitney)
> Fax to:
> Subject:  RE: Vehicular Crash Barriers
>
>
>
>
> Also see AASHTO "Guide Specifications for Bridge Railings"
> Harry
> > -----Original Message-----
> > From:   Al Grathwol [SMTP:AGrathwol(--nospam--at)BoyleEngineering.com]
> > Sent:   Monday, October 04, 1999 12:57 PM
> > To:     'seaint(--nospam--at)seaint.org'
> > Subject:     RE: Vehicular Crash Barriers
> >
> >
> > Are there any codes that cover the design of cast aluminum vehicular
crash
> > barriers? For example, what loads would be considered ?
> >
> > See AASHTO Standard Specs. for  Highway Bridges
> > Al
> >
> >
>
>
>
>
>
>
>
>