Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Stamping calcs generated by an engineer out of the country

[Subject Prev][Subject Next][Thread Prev][Thread Next]
We havew been involved with some projects south of the 49th and have submitted all of our calculations for review by a SE from Oregon or Washington. The calculations were reviewed and any comments were sent back to us for clarification in order to have the drawings sealed.
There is no formal process for this as far as we understand, but the calculations have to be submitted and reviewed per local regulations. I do not know whether or not there is any laws governing this in California??
 
Jamie Lawson P.Eng.
MJL Engineering Ltd.
Abbotsford, BC
-----Original Message-----
From: vicpeng <vicpeng(--nospam--at)vtcg.com>
To: seaint(--nospam--at)seaint.org <seaint(--nospam--at)seaint.org>
Date: Tuesday, December 14, 1999 2:27 PM
Subject: Re: Stamping calcs generated by an engineer out of the country

I would be interested in the process you follow and the problems you may experience.

Thor A Tandy P.Eng, MCSCE
Victoria BC
Canada
e-mail: vicpeng(--nospam--at)vtcg.com
----- Original Message -----
Sent: Tuesday, December 14, 1999 12:19 PM
Subject: Re: Stamping calcs generated by an engineer out of the country

Our company has been asked if we can review and stamp with a California stamp, a set of calculations generated by an engineer in Canada. Can anyone tell us if and where in the board rules/laws indicates this is not allowed. Thanks


Elly D. Rejuso, P.E.