Return to index: [Subject] [Thread] [Date] [Author]

RE: Masonry wall construction

[Subject Prev][Subject Next][Thread Prev][Thread Next]
It's been my experience that grouting "closer than 24 inches" implies that
grouting is at 16" or closer. Here in SoCal, most (if not all) blocks are
open ended, sooo....grouting at 16" IS solid grouted whether you like it or
not.

Regards,

Bill Allen, S.E.
ALLEN DESIGNS
Laguna Niguel, CA


||-----Original Message-----
||From: Dave Adams [mailto:davea(--nospam--at)laneengineers.com]
||Sent: Tuesday, January 11, 2000 4:31 PM
||To: 'seaint(--nospam--at)seaint.org'
||Subject: RE: Masonry wall construction
||
||
||Harold:
||
||In regards to the "solid/partial" grout question for construction in
||California, we will typically design as "solid" if rebar
||spacing is closer
||than 24"o.c., as we've been told by a few masonry contractors
||that at such a
||close spacing, it's tough to keep the wall
||"partially-grouted". I don't know
||if this view/practice is held by the "majority" of contractors or not.
||
||
||Hope this helps.
||
||Dave K. Adams, S.E.
||Lane Engineers, Inc.
||
||
||-----Original Message-----
||From: Sprague, Harold O. [mailto:SpragueHO(--nospam--at)bv.com]
||Sent: Tuesday, January 11, 2000 12:53 PM
||To: seaint(--nospam--at)seaint.org
||Subject: Masonry wall construction
||
||
||Colleagues,
||
||I need some advice regarding regional masonry wall
||construction practices.
||
||----California------
||As I understand it, CMU walls constructed in California are
||all grouted
||solid.  No partial grouting is used regardless of applied load.
||Is this true or false?
||(The traditional rationale has been that all the seismic
||research has been
||done only on fully grouted CMU walls.)
||
||What is the practice of using ladder reinforcing as opposed
||to rebar in
||intermediate bond beams?
||
||
||----Alaska-----
||What is the practice in Alaska?
||
||Thanks,
||Harold Sprague
||
||
||
||