Return to index: [Subject] [Thread] [Date] [Author]

RE: Welding & TI 809-26

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Harold:

The words "methods not mentioned above is discouraged." have been left off.
That's the end of the document. I have notified the Corps. Thanks.

-----Original Message-----
From: Sprague, Harold O. [mailto:SpragueHO(--nospam--at)bv.com]
Sent: Friday, March 31, 2000 1:44 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: Welding & TI 809-26


Bob,

I thought I saw your finger prints on it.  Well done!

Only one problem.  Page D-12 got whacked when it was scanned.  Only the
first sentence is there.  Check it out on the USACE web site.  Are we
missing anything in particular?

Regards,
Harold Sprague


> -----Original Message-----
> From:	Bob Shaw [SMTP:rshaw(--nospam--at)steelstructures.com]
> Sent:	Friday, March 31, 2000 11:24 AM
> To:	seaint(--nospam--at)seaint.org
> Subject:	RE: Welding & TI 809-26
>
> Thanks, Harold. I take that as a big compliment, and it means a lot from
> you. Your expertise is always respected on this server.
>
> I prepared the document for the Corps, under contract through URS/
> Greiner.
> It's always a challenge to put this material into usable terms, and
> satisfy
> the Corps requirements. I'm glad it is considered valuable to the
> engineering community today.
>
> Bob Shaw
> Steel Structures Technology Center
> www.steelstructures.com
>
> PS - I'm planning on bringing the Structural Welding: Design and
> Specification seminar back to Kansas City this Fall. I'm focusing on the
> West Coast in April, and the East in May. St. Louis, KC, Denver is
> included
> in the list for Fall.
>
> -----Original Message-----
> From: Sprague, Harold O. [mailto:SpragueHO(--nospam--at)bv.com]
> Sent: Friday, March 31, 2000 11:46 AM
> To: seaint(--nospam--at)seaint.org
> Subject: Welding & TI 809-26
>
>
>
> To all those that require welding of any type.
>
> Get a copy of the USACE TI 809-26, Welding - Design Procedures and
> Inspections, 1 March 2000.  It is one of the most comprehensive welding
> documents that I have seen.  It covers welding, alloys, welding to
> existing
> old structures, studs, inspection, high seismic, fatigue, design
> considerations, etc.  It is a must read available for the price of free
> from
> the USACE at http://www.hnd.usace.army.mil/techinfo/ti.htm.
>
> My hat is off to the US Army Corps of Engineers.
>
> Regards,
> Harold Sprague
>
>