Return to index: [Subject] [Thread] [Date] [Author]

Re: Steel-Detail: Through Plate Connections

[Subject Prev][Subject Next][Thread Prev][Thread Next]
If required, the cross shaped through plates should be fabricated out of
one long plate and 2 shorter plates welded together. If it is located at
the top of a tube column, it could be dropped into slots from the top
and welded up. If it is at an intermediate height, the column needs to
be cut in half and then the procedure is similar to installation at the
top of a column, except the column pieces need to be welded back
together after installation of the through plates.


Jim Kestner, P.E.
Green Bay, Wi.



--
Jim Kestner, P.E.
Green Bay, Wi.