Return to index: [Subject] [Thread] [Date] [Author]

RE: Autocad 2000 question

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The problem encountered is not due your datafile, but with the operational
characteristics of release 14 itself. Acadr14 does not support multiple
paperpsaces. Your best bet would be to create two files from your original
and delete the "odd" layout from each.

On a separate note, do you model your ADT2 structures in 3d? If not what are
the benefits of using ADT2 vs plain Acadr2000?

Brent R. Koch, PE
Koch Engineering, Inc.
Livermore, CA
mailto:kochengr(--nospam--at)pacbell.net



-----Original Message-----
From: Dennis S. Wish [mailto:dennis.wish(--nospam--at)gte.net]
Sent: Wednesday, May 24, 2000 09:00
To: SEAINT Listservice
Subject: Autocad 2000 question


For all you Autocad Buff's - please help me with this one.
I created a small drawing (under 1 meg in size) in Autocad 2000 ADT 2 which
contains two Layouts in Paperspace - each representing a separate sheet
(S1.0 and S2.0). The actual plans, sections and details were created in
model space and the views of each laid out in the Paperspace Layout sheet.
The tabs were also named according to the Sheet number S1.0 and S2.0.

I converted the drawing to R14 for my client who is unable to locate the
S1.0 notes sheet. I opened the R14 drawing in R2000 and it is still there
just as it was in R2000. Although I know how to use views, model and paper
space, I can not advise my client how to bring up the paperspace view of
sheet S1.0 in release 14.

Can anyone help me with this one. BTW, doing it this way, seemed to save me
about 2 megs in files size as the total package saved in only 640K.

Regards,
Dennis S. Wish, PE
Structural Engineering Consultant
structures(--nospam--at)engineer.com <mailto:structures(--nospam--at)engineer.com>
(208) 361-5447 E-Fax