Return to index: [Subject] [Thread] [Date] [Author]

RE: yield strength of A706 rebar

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The minimum tensile strength is the larger of 80 ksi or 1.25 times the
actual yield strength.

The yield strength must be between 60 ksi and 78 ksi.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Michael Valley, P.E., S.E.                   E-mail: mtv(--nospam--at)skilling.com
Skilling Ward Magnusson Barkshire Inc.              Tel:(206)292-1200
1301 Fifth Ave, #3200,  Seattle  WA 98101-2699      Fax:        -1201

-----Original Message-----
From: frp 2000 [mailto:frp2000(--nospam--at)hotmail.com]
Sent: Wednesday, June 21, 2000 12:57 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: yield strength of A706 rebar


What is the specified ultimate strength for A706 ??

Is that also given as a minimum ??

jgkorff, pe

----- Original Message -----
From: "Brent Koch" <kochengr(--nospam--at)pacbell.net>
To: <seaint(--nospam--at)seaint.org>
Sent: Wednesday, June 21, 2000 12:37 PM
Subject: RE: yield strength of A706 rebar


> The specified minimum yield strength for A706 reinforcing steel is
60,000
> psi. This is the ONLY yield strength level covered by the A706
> specification. Thus by specifying A706 reinforcing the 60 ksi yield
strengh
> is automatic. Also, AFAIK, there is no such thing as A706 #3. The
mills
roll
> this spec. in #4 and larger.
>
> Brent R. Koch, P.E.
> KOCH ENGINEERING, INC.
> Livermore, CA
> mailto:kochengr(--nospam--at)pacbell.net
>
>
> From: Dan Vines [mailto:dan(--nospam--at)willettengineering.com]
> Sent: Wednesday, June 21, 2000 09:37
> To: SEAINT (E-mail)
> Subject: yield strength of A706 rebar
>
>
> Is A706 (weldable) rebar available in gr60?
>
> Thanks
> Dan
>
> Sherman D. (Dan) Vines, EIT
> Willett Engineering Co., Inc.
> dan(--nospam--at)willettengineering.com