Return to index: [Subject] [Thread] [Date] [Author]

RE: yield strength of A706 rebar

[Subject Prev][Subject Next][Thread Prev][Thread Next]
What Chary V-notch Values can be expected at -20F?

-----Original Message-----
From: Mike Valley [mailto:mtv(--nospam--at)skilling.com]
Sent: Wednesday, June 21, 2000 12:24 PM
To: seaint(--nospam--at)seaint.org
Subject: RE: yield strength of A706 rebar


The minimum tensile strength is the larger of 80 ksi or 1.25 times the
actual yield strength.

The yield strength must be between 60 ksi and 78 ksi.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Michael Valley, P.E., S.E.                   E-mail: mtv(--nospam--at)skilling.com
Skilling Ward Magnusson Barkshire Inc.              Tel:(206)292-1200
1301 Fifth Ave, #3200,  Seattle  WA 98101-2699      Fax:        -1201

-----Original Message-----
From: frp 2000 [mailto:frp2000(--nospam--at)hotmail.com]
Sent: Wednesday, June 21, 2000 12:57 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: yield strength of A706 rebar


What is the specified ultimate strength for A706 ??

Is that also given as a minimum ??

jgkorff, pe

----- Original Message -----
From: "Brent Koch" <kochengr(--nospam--at)pacbell.net>
To: <seaint(--nospam--at)seaint.org>
Sent: Wednesday, June 21, 2000 12:37 PM
Subject: RE: yield strength of A706 rebar


> The specified minimum yield strength for A706 reinforcing steel is
60,000
> psi. This is the ONLY yield strength level covered by the A706
> specification. Thus by specifying A706 reinforcing the 60 ksi yield
strength
> is automatic. Also, AFAIK, there is no such thing as A706 #3. The
mills
roll
> this spec. in #4 and larger.
>
> Brent R. Koch, P.E.
> KOCH ENGINEERING, INC.
> Livermore, CA
> mailto:kochengr(--nospam--at)pacbell.net
>
>
> From: Dan Vines [mailto:dan(--nospam--at)willettengineering.com]
> Sent: Wednesday, June 21, 2000 09:37
> To: SEAINT (E-mail)
> Subject: yield strength of A706 rebar
>
>
> Is A706 (weldable) rebar available in gr60?
>
> Thanks
> Dan
>
> Sherman D. (Dan) Vines, EIT
> Willett Engineering Co., Inc.
> dan(--nospam--at)willettengineering.com