Return to index: [Subject] [Thread] [Date] [Author]

RE: Seismic forces from industrial equipment

[Subject Prev][Subject Next][Thread Prev][Thread Next]
See ASCE publication Guidlines for Seismic Evaluation and Design of
Petrochemical Facilities. It will provide you some information on equipment
of that type.
Regards,
Bob Hanson

-----Original Message-----
From: RajSTC(--nospam--at)aol.com [mailto:RajSTC(--nospam--at)aol.com]
Sent: Wednesday, September 06, 2000 2:45 PM
To: seaint(--nospam--at)seaint.org
Subject: Seismic forces from industrial equipment



Seismic criteria in ASCE 7 and UBC are tailored for building structures.
ASCE 7-93 specifically excludes industrial towers, equipment, etc., from its
provisions. UBC 1997 has increased the confusion that existed in previous
versions.  So far, I was using some judgment in estimating seismic forces
for
horizontal tanks supported on concrete pedestals.  The error in judgment, if
any, would not affect the design in lower seismic zones because wind loads
would more likely to be the governing lateral force.  However, for heavier
tanks, the error in estimating seismic force may be less desirable.

Any suggestions for estimating seismic forces from industrial equipment such
as horizontal tanks supported on concrete pedestals?

P. Rajendran
Service & Technology Corporation
105 SW Penn
Bartlesville, OK 74003
Ph: 918 336 8161  FAX: 918 336 8265

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) to the list, send email to
*   admin(--nospam--at)seaint.org and in the body of the message type
*   "join seaint" (no quotes). To Unsubscribe, send email
*   to admin(--nospam--at)seaint.org and in the body of the message
*   type "leave seaint" (no quotes). For questions, send
*   email to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********


******* ****** ******* ******** ******* ******* ******* *** 
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) to the list, send email to 
*   admin(--nospam--at)seaint.org and in the body of the message type 
*   "join seaint" (no quotes). To Unsubscribe, send email 
*   to admin(--nospam--at)seaint.org and in the body of the message 
*   type "leave seaint" (no quotes). For questions, send 
*   email to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********