Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Chain Link Fence DL

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Visting McMaster Carr website (www.mcmaster.com) & doing some rough
estimates & calcs ...my best swag would be about 1 psf (max) for the
"fabric" depending on wire gage & opening size.  Framing (poles, top &
bottom members) could add another .5 psf (again depending on dia &
wall)...hope this helps.

If you have a pretty god idea of the  fence configuration you could probably
get a lot closer than I did using the info at http://www.mcmaster.com/

regards
Bob Kazanjy, PE
Dept of Civil Eng - UC Irvine


----- Original Message -----
From: "Brent Koch" <kochengr(--nospam--at)pacbell.net>
To: <seaint(--nospam--at)seaint.org>
Sent: Thursday, October 05, 2000 2:43 PM
Subject: Chain Link Fence DL


> Anyone have a rough idea what chain link fencing weighs per sq. ft.?
>
> TIA
>
> Brent R. Koch, P.E.
> KOCH ENGINEERING, INC.
> Livermore, CA
> mailto:kochengr(--nospam--at)pacbell.net
>
>