Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Drilled Piers

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Around here (Iowa/Illinois) piers of that size would probably be 4-foot
diameter shafts with 9-foot diameter bells.

----- Original Message -----
From: Jason Kilgore <jkilgore(--nospam--at)leok.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Friday, December 08, 2000 2:15 PM
Subject: Drilled Piers


> I'm working on a project in the Kansas City area that will utilize drilled
> piers.
> Based on the loads and soil conditions (soft clay over bedrock), we're
> looking at using 9'-0" diam. x 35' long piers in some locations.
Including
> the cap, this is over 100 yd^3 of concrete per pier!
>
> I've never worked with piers larger than 6'-0" before, so I don't even
know
> if they make an auger this big.  Anyone have any experience with this?
>
> I'm not the head guy on this -- I'm just helping another engineer out.
I'm
> not making any of the decisions on the project.  I just thought I'd check
on
> what was available before the final drawings go out next month.
>
> ----
> Jason W. Kilgore
> Leigh & O'Kane, L.L.C.
> jkilgore(--nospam--at)leok.com
> (816) 444-3144
>
>
>
>