Return to index: [Subject] [Thread] [Date] [Author]

RE: Moment of Inertia using Autocad

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Michael V & Michael B.

Thanks for the advice, it definately makes a difference - However, if I draw a box 10,20,1 and move it so the centroid is a 0,0,0 MASSPROP is telling me that Ix=6683.333 not 6666.667 that 1/12*10*20^3 would produce. Any Ideas ?

HERE IS THE OUTPUT FROM MASSPROP:

----------------   SOLIDS    ----------------

Mass:                    200.0000
Volume:                  200.0000
Bounding box:         X: -5.0000  --  5.0000
                      Y: -10.0000  --  10.0000
                      Z: -0.5000  --  0.5000
Centroid:             X: 0.0000
                      Y: 0.0000
                      Z: 0.0000
Moments of inertia:   X: 6683.3333
                      Y: 1683.3333
                      Z: 8333.3333
Products of inertia: XY: 0.0000
                     YZ: 0.0000
                     ZX: 0.0000
Radii of gyration:    X: 5.7807
                      Y: 2.9011
                      Z: 6.4550
Press ENTER to continue:
Principal moments and X-Y-Z directions about centroid:
                      I: 6683.3333 along [1.0000 0.0000 0.0000]
                      J: 1683.3333 along [0.0000 1.0000 0.0000]
                      K: 8333.3333 along [0.0000 0.0000 1.0000]


Gerard Madden, P.E.
Civil Engineer

Middlebrook + Louie, Structural Engineers
71 Stevenson Street, Suite 2100
San Francisco, CA 94105
Tel: 415.546.4900
Fax: 415.974.3680
Email: gmadden(--nospam--at)mplusl.com