Return to index: [Subject] [Thread] [Date] [Author]

Fw: Re: wind on shade fabric

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Per ASCE a minimum 10 PSF shall be used, although for similar
type of fabrics experiments in a wind tunnel environment show that
it could be reduced to 3-5 PSF.

Hope this helps,

Desi J. Kiss, P.E.

On Fri, 16 Feb 2001 15:26:16 -0800 Ed.Haninger(--nospam--at) writes:
> I am looking for wind design info for a structure I am working on.  
> I have
> a shade structure over 100 ft square in plan in a gable roof type 
> shape.  I
> am looking for any information you may have on whether the wind load 
> is
> reduced on shade type fabric.  The type being considered is 75% 
> solid with
> holes spaced maybe 1/4 on center each way.   Are there any studies, 
> tests
> or code provisions which address this situation.  The client says 
> that this
> fabric moves around a lot less than solid fabric.  I can see that, 
> but I
> would like some kind of engineering data to back that up.  I have 
> checked
> out the reference  list in ASCE 7-98 and some looked related but 
> were
> unavailable.  Any ideas would be appreciated.
> Thanks,
> Ed Haninger, SE
> The information transmitted is intended only for the person
> or entity to which it is addressed and may contain confidential
> and/or privileged material. If you are not the intended recipient 
> of this message you are hereby notified that any use, review,
> retransmission, dissemination, distribution, reproduction or any
> action taken in reliance upon this message is prohibited. If you 
> received this in error, please contact the sender and delete the 
> material from any computer.  Any views expressed in this message
> are those of the individual sender and may not necessarily reflect 
> the views of the company.  

Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit: