Return to index: [Subject] [Thread] [Date] [Author]

Re: PLT of AutoCAD

[Subject Prev][Subject Next][Thread Prev][Thread Next]
If you want to do the procedure below to a network printer/plotter then

In Win95/98 you should be able to redirect lpt1 to a network printer/plotter in the Printer Properties page using a Capture Printer Port option in the Details tab.

In WinNT/2000 you can use a Net Use command in the autoexec.nt file to do the same thing.


At 03:16  12/03/01 -0800, you wrote:
From a dos prompt you can type "copy  *.plt  >lpt1", to send the file
directly to the parrallel port.  Only do this from the computer that is
directly attached to the plotter via LPT1.  The *.plt would have had to be
created for your plotter specifically.

Pat Clark P.E.


-----Original Message-----
From: Joseph Harouni <yosi_h(--nospam--at)msn.com>
To: seaint(--nospam--at)seaint.org <seaint(--nospam--at)seaint.org>
Date: Monday, March 12, 2001 12:32 PM
Subject: PLT of AutoCAD


>Hi,
>I received a file with extension of plt from an AutoCAD consultant. Is
there
>a way of plotting it?
>I use Microstation.
>Thanks,
>Joseph Harouni
>
>
>



Regards  Gil Brock
Prestressed Concrete Design Consultants Pty. Ltd.
5 Cameron Street Beenleigh Qld 4207 Australia
Ph +61 7 3807 8022              Fax +61 7 3807 8422
email:          gil(--nospam--at)raptsoftware.com
email:          sales(--nospam--at)raptsoftware.com
email:          support(--nospam--at)raptsoftware.com
webpage:        http://www.raptsoftware.com