From: Roger Turk <73527.1356(--nospam--at)compuserve.com>
Date: Fri, 6 Apr 2001 12:28:50 -0500
Mark Gilligan wrote:
. > Gray
. > I would recommend that you consider at least a 0.25"/12" roof slope at the
. > top of the membrane. This corresponds to the minimum slope in the UBC.
. > Floor drains are typically used in this situation. An architect or a
. > plumbing engineer should know how to detail the interface with the
. > membrane.
. > Mark Gilligan
If camber on the TTs is greater than L/360, even this slope will result in
ponding at the supports.
A. Roger Turk, P.E.(Structural)