Return to index: [Subject] [Thread] [Date] [Author]

Re: 2nd floor addition

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I believe you should get someone who is experienced to work on this with
you. Have you gotten planning approval? You may not be able to go
straight up. Many agencies require second floor setback for a portion of
each wall.

On Sat, 28 Apr 2001 22:07:29 -0700 "GaryD" <garydellbate(--nospam--at)home.com>
writes:
> Another simple question (probably) all the wood design experts.
> 
> I thinking about the best way to approach an existing 1 story house 
> that is getting a 2nd floor addition. Normally, I would assume that 
> the roof gets removed, floor framing is placed, and the 2nd floor 
> platform walls will sit over the lower walls just like in a new 
> house. I have a situation where we are required to raise the 
> original lower floor ceiling height from 8 ft to 9 ft.What are the 
> various methods to achieve this? I was thinking that simply adding 
> cripple studs would not be good to make up the 1 ft difference 
> because I would be relying on a 1 ft strip of plywood when I was 
> taught not to use plywood with less than 24" in shear panels. To 
> complicate things, the 2nd floor ceiling height is 10'-6" so I would 
> have another joint since I believe plywood is only available in 10' 
> max sheet sizes.
> 
> Thanks for any comments .
> 
> Gary

* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org