Return to index: [Subject] [Thread] [Date] [Author]

Re: "Pre-Engineered" Metal Buildings

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Please don't "stamp" drawings that you did not produce.  The engineer that
designed the building should stamp the building design package.

If you are the "engineer of record" (EOR), then you should apply your stamp
to the foundation system, etcetera, but not the building structure.

__________________
John P. Riley, PE, SE
Riley Engineering
20 Oakwood Drive, Blue Grass, Iowa 52726
Tel & Fax:  319-381-3949
jpriley485(--nospam--at)peoplepc.com

----------------------------------------------------------
 Bill:
When you seal or stamp this type of building, do you have to check or review
the struc. analysis?  I'm sure there will be nothing will go wrong after the
construction.  What if ??
----------------------------------------------------------
--- Bill Polhemus <bill(--nospam--at)polhemus.cc> wrote:
By "pre-engineered" is mean there are standard, manufactured components that
have been designed for the various design  parameters. Each building is
indeed "engineered", but it is the case of running their proprietary
programs to select pre-specified components, putting the package together
and shipping it out.

Every one should have a seal by an engineer licensed in the state where the
building will be erected. No doubt about it.
William L. Polhemus, Jr., P.E.
Polhemus Engineering Company
Katy, Texas
Phone 281-492-2251
Fax 281-492-8203



* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org