Return to index: [Subject] [Thread] [Date] [Author]

Re: Nelson Stud

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The concrete pull out strength typically governs.  See section 1923 of the
UBC for anchorage to concrete.  Also PCA has an excellent publication
"Strength Design of Anchorage to Concrete" that will present a more in-depth
review.

Paul Feather
----- Original Message -----
From: "YI" <YI(--nospam--at)summit-sr.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Friday, May 11, 2001 9:43 AM
Subject: Nelson Stud


> I'm looking for any documentation on the pull-out strength of welded
nelson
> studs / headed concrete anchor, such as those used on embedded edge angles
> etc.  I found an ICBO report (ER-2614) on Nelson stud with allowable shear
> strength, but not tensile strength.  Thanks in advane.
>
> Yi Yang, PE
> Santa Rosa, CA
>
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
>


* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org