RE: TRUSS QUESTION[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: "'seaint(--nospam--at)seaint.org'" <seaint(--nospam--at)seaint.org>
- Subject: RE: TRUSS QUESTION
- From: Robert Rollo <rrollo(--nospam--at)TEAM-PSC.com>
- Date: Tue, 15 May 2001 16:07:45 -0500
my read on stitch plates would be at the 1/3 points. we've had internal debate (spelled argument) on this for years though . . .
see E4 in the ASD 9th edition about the middle paragraph ?
r o b e r t d. r o l l o
Parkhill, Smith & Cooper, Inc.
4222 85th st
Lubbock, Texas 79423
(806) 473-2200 vox
(806) 473-3500 fax
From: John P. Riley [SMTP:jpriley485(--nospam--at)peoplepc.com]
Sent: Tuesday, May 15, 2001 3:55 PM
Subject: TRUSS QUESTION
I don't think you can get tube in ASTM A36 steel.
If you use double angles, make sure to stitch them at least at mid-span.
I'd have to go back through my records, but at one time I determined one
stitch plate was required and no more . . . maybe it had to do with the size
and length, don't remember.
You will need a deck under the standing seam roofing, adds at least 3
pounds. Spacing of the trusses will be predicated on the roof deck's
Personally, I would not feel comfortable excluding a ceiling weight, even if
the plan excludes it; since I'm so conservative, the fictitious ceiling
weighs 10 psf. My attitude is that the cost of handling, cutting, bolting,
welding and erecting the trusses establishes a baseline cost. To beef the
trusses up during the design phase adds little. If I'm mistaken on this
matter, so be it, I'm stuck in my ways!
John P. Riley, PE, SE
20 Oakwood Drive, Blue Grass, Iowa 52726
Tel & Fax: 319-381-3949
> I was asked to design a 110 ft span roof truss. The truss will only carry
> the standing seam roof and some lamps inside. No snow, medium risk seismic
> zone and a 75 mph wind. The supporting columns will be made of concrete.
> owner wants to use equal leg angles (L) and tubes (HSS) in A36 steel for
> price reasons.
> Any suggestions on truss shape (Pratt, Howe, scissor, etc), truss depth,
> truss spacing and if intermediate columns are required?
> Thank you for your prompt answers,
> Juan José
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> ******* ******* ******* ***
> * Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> * This email was sent to you via Structural Engineers
> * Association of Southern California (SEAOSC) server. To
> * subscribe (no fee) or UnSubscribe, please go to:
> * http://www.seaint.org/sealist1.asp
> * Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> * send to the list is public domain and may be re-posted
> * without your permission. Make sure you visit our web
> * site at: http://www.seaint.org
******* ******* ******* ***
* Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* This email was sent to you via Structural Engineers
* Association of Southern California (SEAOSC) server. To
* subscribe (no fee) or UnSubscribe, please go to:
* Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
* send to the list is public domain and may be re-posted
* without your permission. Make sure you visit our web
* site at: http://www.seaint.org ****** ****** ********
- Prev by Subject: Re: TRUSS QUESTION
- Next by Subject: RE: TRUSS QUESTION
- Previous by thread: RE: TRUSS QUESTION
- Next by thread: RE: TRUSS QUESTION