Return to index: [Subject] [Thread] [Date] [Author]

RE: Anchoring in rock

[Subject Prev][Subject Next][Thread Prev][Thread Next]
James,
I appreciate very much your information.
The document from FHWA is great !
Thanks.
R. Labbé
-----Mensaje original-----
De: Lutz, James <JLUTZ(--nospam--at)earthtech.com>
Para: seaint(--nospam--at)seaint.org <seaint(--nospam--at)seaint.org>
Fecha: Jueves, 17 de Mayo de 2001 10:04 a.m.
Asunto: RE: Anchoring in rock


Check out FHwA's Circular 4, "Ground Anchors and Anchored Systems," which is
a pretty comprehensive guide to ground anchors of all types, including rock
anchors.

http://www.fhwa.dot.gov/bridge/if99015.pdf
<http://www.fhwa.dot.gov/bridge/if99015.pdf>

-----Original Message-----
From: raul labbe [mailto:rlabbe(--nospam--at)ctcinternet.cl]
Sent: Wednesday, May 16, 2001 10:31 PM
To: seaint(--nospam--at)seaint.org
Subject: Anchoring in rock


Fellow engineers,

I am working in a design job, including foundations in
an area with a shallow rock layer. Some of the structures
to be supported involve high piers, to be properly secured
against lateral forces and overturning, arising from wind and
earthquakes.
Instead of rock excavation to allow for big footings working
as counterweights, we are considering the option of anchoring
in the rock, reducing both, expensive rock excavation and the volume
of concrete. The anchors would be grout injected rebars.

If anybody could help, we are looking for some hint regarding
the following :  minimum spacing of the anchors, "skin friction"
or allowable bonding to be considered in the rock, for determining
anchor capacity and the required length. Any special consideration
if bundle bars are used. Information about some SPECS to be
got on line will be appreciated.

Thanks in advance

Raul Labbé S.E.
rlabbe(--nospam--at)ctcinternet.cl <mailto:rlabbe(--nospam--at)ctcinternet.cl>





*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org


* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org