Return to index: [Subject] [Thread] [Date] [Author]

Re: SEISMIC BRACING

[Subject Prev][Subject Next][Thread Prev][Thread Next]
You have to design it for seismic forces.

Stan Scholl, P.E.
Laguna Beach, CA

On Wed, 30 May 2001 08:20:22 -0600 "Joseph Ward"
<joseph_ward(--nospam--at)leavittengineers.com> writes:
> I am looking for a standard / requirement for seismic bracing of 
> mechanical,
> plumbing, and electrical systems supported by hanger/trapeze strut 
> system.
> Does the building code specifically state these items must be 
> braced, and if
> so, at what interval?
> 
> Thank you,
> 
> Joseph Ward, EIT
> Leavitt & Associates Engineers, Inc.
> 
> 
> 
> * 
> *   This email was sent to you via Structural Engineers 
> *   Association of Southern California (SEAOSC) server. To 
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
> *   send to the list is public domain and may be re-posted 
> *   without your permission. Make sure you visit our web 
> *   site at: http://www.seaint.org 

* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org