Return to index: [Subject] [Thread] [Date] [Author]

Re: Oversize bolt holes

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Section J-3, page 5-71 table J3.1 provides the limits that the hole may be
oversized. Look at 2.a, and you will see these are
the maximum except for column base plates.

Paul Feather
----- Original Message -----
From: "Nicholas Blackburn" <nblackburn(--nospam--at)fdgoak.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Monday, June 18, 2001 2:49 PM
Subject: Oversize bolt holes


> Can anyone direct me to the section of the AISC 9th ed. that discusses
> limits for oversizing bolt holes.  I looked at J3 and Table J3.1 and the
> commentary but was unable to find any indication as to the allowable
amount
> that a hole/slot may be oversized (diameter/width and length), just that
> they may be oversized at column bases.
>
> Thanks
>
> Nick Blackburn
>
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
>


* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org