Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Calculation Submittal

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I forgot to mention, we provide the abbreviation for each code in the
listing because all calcs are cross referenced to where applicable code
requirements, formulas, etc, were taken from.

Paul Feather
----- Original Message -----
From: "Mitchell J. Sklar" <MJS(--nospam--at)bala.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Monday, October 01, 2001 9:12 AM
Subject: RE: Calculation Submittal


This is what I am more or less looking for. Do you have an expanded
version?

Mitchell J. Sklar, P.E.
Senior Structural Engineer

BALA Consulting Engineers, Inc.
(mjs(--nospam--at)bala.com)
p 610-649-8000 x345
f 610-649-8475


-----Original Message-----
From: Paul Feather [mailto:pfeather(--nospam--at)san.rr.com]
Sent: Monday, October 01, 2001 12:14 PM
To: seaint(--nospam--at)seaint.org
Subject: Re: Calculation Submittal


Our approach is to include a Section titled Basis of Design on the first
page after the cover that states "All calculations and specifications
conform to the established guidelines set forth by: " , then list the
various applicable codes (building and material), and at the end state
"In
the event of a conflict in the specifications, the Uniform Building Code
governs"

We always submit calculations, being on the west coast, and we consider
this
sufficient.  What else are you specifically trying to convey in the
cover
letter?

HTH

Paul Feather

----- Original Message -----
From: "Mitchell J. Sklar" <MJS(--nospam--at)bala.com>
To: <seaint(--nospam--at)seaint.org>
Sent: Monday, October 01, 2001 8:35 AM
Subject: RE: Calculation Submittal


Done all that. I am looking for some type of cover letter to go on top
of the calculations.

Mitchell J. Sklar, P.E.
Senior Structural Engineer

BALA Consulting Engineers, Inc.
(mjs(--nospam--at)bala.com)
p 610-649-8000 x345
f 610-649-8475


-----Original Message-----
From: Gary Ehrlich [mailto:GEhrlich(--nospam--at)mcecorp.com]
Sent: Monday, October 01, 2001 11:48 AM
To: seaint(--nospam--at)seaint.org
Subject: RE: Calculation Submittal



When I have to submit design calculations, I list somewhere the building
code and major material codes (AISC Spec, ACI 318, etc.) used.  Either
on
the cover sheet, or on a design criteria sheet (that also lists all the
basic dead and live, snow, wind, and seismic loads I've used)

-- Gary

Gary J. Ehrlich, P.E.
Project Engineer
Meyer Consulting Engineers Corp.
451 Hungerford Drive, Suite 113
Rockville, MD  20850
(301) 738-5690
(301) 738-5695 (fax)

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********