Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: IBC 2305.3.10 2x2x3/16 plate washers

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Scott,

In my understanding, it's always required in seismic zones 3 and 4.

Henry
----- Original Message -----
From: Haan, Scott M. <HaanSM(--nospam--at)ci.anchorage.ak.us>
To: Seaint list (E-mail) <seaint(--nospam--at)seaint.org>; Alan Carr (E-mail)
<carr(--nospam--at)icbo.org>
Sent: Tuesday, November 13, 2001 6:33 PM
Subject: IBC 2305.3.10 2x2x3/16 plate washers


> A week or so back there was a discussion on when 2x2x3/16 plate washers
are
> required. 1997 UBC 1806.6.1 just said the plate washers are required.
FEMA
> 368 says they are always required.   IBC 2305.3.10 specifically requires
the
> plate washers for 2x sills but does not specifically require them for 3x.
> My take is they are not required for 3x sills by the IBC.
>
>
> Is the IBC intending that plate washers are not required for 3x?
>
>
>
> Thanks!
>
>
> Scott M Haan P.E.
> Plan Review Engineer
> Building Safety Division
> Development Services Department
> Municipality of Anchorage
> http://www.muni.org/building
> phone:907-343-8183
> fax:907-249-7399
> mailto:haansm(--nospam--at)ci.anchorage.ak.us
>
>
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********