Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Q: COMPRESSION Force On Anchor Bolts/Rods

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Usually the leveling nuts would be above the concrete surface, not in
contact with it unless grouted.

Roger C. Davis
Architect
SDS Architects, Inc.


-----Original Message-----
From:	Neil Moore [mailto:nmoore(--nospam--at)innercite.com]
Sent:	Wednesday, December 12, 2001 9:58 AM
To:	seaint(--nospam--at)seaint.org
Subject:	RE: Q: COMPRESSION Force On Anchor Bolts/Rods

...

Many poles will have leveling nuts and questionable grout or no grout.  If
the leveling nuts are left in place, then the compression load is going to
be resisting by them and should be taken into account.

Neil Moore, S.E.
neil moore and associates




******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********