Return to index: [Subject] [Thread] [Date] [Author]

RE: Chicago Area Snow Loads

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The 1996 MBMA Low Rise Building Systems Manual indicates a minimum ground
snow load of 25 psf for Cook County also.

If applicable, you might verify that the Chicago Building Code also agrees.

HTH,
Greg Effland, P.E.
KC, MO USA


-----Original Message-----
From: Trent Nagele [mailto:trent(--nospam--at)vlmk.com]
Sent: Thursday, January 10, 2002 10:19 AM
To: seaint(--nospam--at)seaint.org
Subject: Chicago Area Snow Loads


Dear List:

I would like to know what the typical design snow loads are for the Chicago
area.  We have a project in one of the outlying cities to the west.  Upon
inquiring with the local building official, we were told to look it up in
the Code.  The ground snow map (Pg) contained in BOCA shows 25 psf, which
can then be reduced for the roof snow load (Pf).

Is 25 psf really the typical design snow load?  Is it typical to reduce this
load?

Have I just seen too many pictures on the news of people surrounded by piles
of snow freezing to death in the Windy City!?

Thank you in advance for your input and wisdom,

Trent


***************************************
Trent Nagele, P.E., S.E.
VLMK Consulting Engineers
503.222.4453
503.248.9263 fax
3933 SW Kelly Ave.
Portland, OR  97201

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********