Return to index: [Subject] [Thread] [Date] [Author]

Re: Determining Domestic Steel

[Subject Prev][Subject Next][Thread Prev][Thread Next]
>ced in the US. The
>mill certifications state, "Made in USA" but the maple leafs stamped on
>the beams and columns lead me to belie
Someplace on the cert the producing plant should be listed. If it isn't
get in touch with your supplier and point out that that the steel isn't
in compliance with your purchase order (Made in USA _was_ stated on the
purchase order, wasn't it?) in which case you can send the stuff back.
Suppliers usually come around under those conditions.

Christopher Wright P.E.    |"They couldn't hit an elephant from
chrisw(--nospam--at)skypoint.com        | this distance"   (last words of Gen.
___________________________| John Sedgwick, Spotsylvania 1864)
http://www.skypoint.com/~chrisw


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********