Return to index: [Subject] [Thread] [Date] [Author]

x-bracing connections

[Subject Prev][Subject Next][Thread Prev][Thread Next]
I have a client that says he has problems in the field with bolting
x-bracing.  The diagonals are generally 3x3 x1/4 angles bolted to gussets.
The holes are 13/16" diameter predrilled for 3/4" bolts.  They claim that
the holes never align.  They want to maintain an all bolted erected
structure and welding the angle to the gusset is not an option.

Has anyone had this problem with miss matched holes??  They claim the hole
locations are correct based on shop drawings but they think tolerances cause
the problem.

Ronald Hill, P.E.
HILL Consulting Engineering
PO BOX 26525
Birmingham, Alabama 35260 USA
Phone: 205.823.4784
FAX: 205.823.4145
Email: ronhill(--nospam--at)
Efax: 509.275.8095

******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at:
******* ****** ****** ****** ******* ****** ****** ********