Return to index: [Subject] [Thread] [Date] [Author]

RE: Plywood Deck - Waterproofing

[Subject Prev][Subject Next][Thread Prev][Thread Next]
You could use a galvanized metal deck for the diaphragm below the ornamental
standing seam.
Roger C. Davis
Architect
SDS Architects, Inc.


-----Original Message-----
From:	Bill Polhemus [mailto:bill(--nospam--at)polhemus.cc]
Sent:	Thursday, February 07, 2002 7:43 PM
To:	seaint(--nospam--at)seaint.org
Subject:	Plywood Deck - Waterproofing

I have an exterior covered entryway that I have to finish up designing right
quick. The original design by the architect had a sloped standing-seam roof,
but with no provision for lateral wind resistance.

When I pointed out we were going to have to do something (horizontal
bracing, etc.) the architect and I discussed it for awhile and he came up
with simple plywood sheathing under the standing-seam roof deck. My question
to him was "how do we keep the plywood from rotting when, as is inevitable
here in Houston, it will stay wet for much of the time. He answered "just
put some notes in there about a wood sealer, and roofing felts.

Has anyone else done a plywood diaphragm as a "sub-roof" under
standing-seam? If so, how did you tackle this problem?


William L. Polhemus, Jr. P.E.
Polhemus Engineering Company
Katy, TX, USA
Phone (281) 492-2251
FAX (281) 492-8203
email bill(--nospam--at)polhemus.cc



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********