Return to index: [Subject] [Thread] [Date] [Author]

Re: Opinions Please: Composite Beam/Deck Slab

[Subject Prev][Subject Next][Thread Prev][Thread Next]
There are also metal decks available where the high rib has a continuous
plate underneath flush with the low rib to create avenues for conduit
without embedding the stuff permanently. I believe it is called
"Electrofied". Most deck producers should carry this.

-gerard
Santa Clara, CA
----- Original Message -----
From: "Daryl Richardson" <h.d.richardson(--nospam--at)shaw.ca>
To: <seaint(--nospam--at)seaint.org>
Sent: Thursday, February 28, 2002 11:40 AM
Subject: Re: Opinions Please: Composite Beam/Deck Slab


> Keith,
>
> Aluminum, or some aluminum products react chemically with cement.  If
> you are not using aluminum conduit what you are doing should work unless
> it violates one of your codes.
>
> Regards,
>
> H. Daryl Richardson
>
> Keith Fix wrote:
> >
> > Conduit has been laid on the deck.  Concrete has not yet been placed,
but is
> > scheduled to be placed tomorrow.  Are there conditions in which conduit
cast
> > horizontally in the plane of the slab is acceptable?
> >
> > -Keith Fix, PE
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Greetings - Send FREE e-cards for every occasion!
> > http://greetings.yahoo.com
> >
> > ******* ****** ******* ******** ******* ******* ******* ***
> > *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> > *
> > *   This email was sent to you via Structural Engineers
> > *   Association of Southern California (SEAOSC) server. To
> > *   subscribe (no fee) or UnSubscribe, please go to:
> > *
> > *   http://www.seaint.org/sealist1.asp
> > *
> > *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> > *   send to the list is public domain and may be re-posted
> > *   without your permission. Make sure you visit our web
> > *   site at: http://www.seaint.org
> > ******* ****** ****** ****** ******* ****** ****** ********
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********