aluminum welding[Subject Prev][Subject Next][Thread Prev][Thread Next]
- To: <seaint(--nospam--at)seaint.org>
- Subject: aluminum welding
- From: "SEAINT List" <bwslist(--nospam--at)bwsmithse.com>
- Date: Mon, 4 Mar 2002 14:28:11 -0800
A roofer discovered badly "eaten" base of 3" diameter aluminum pole of a church cross on top of a bell tower. The base of the pole was fixed by encasing it in concrete grout which was contained in open pan made with steel plates. When I saw it, I was surprised to see the pole lasted as long as it did (built in 1958) as I know aluminum reacts with concrete.
My recommended remedial fix was to weld stainless steel fins on four sides of the cross pole and the mild steel pan. The steel pan is secured to the tower roof framing.
The contractor has contacted seveal welders who all told him that it is not possible to weld stainless steel to aluminum. Is this true? I would appreciate any comments or resouce I could read. My AWS D1.1 does not cover welding of disparate base materials.
Brad Smith, SE
- Prev by Subject: Re: Aluminum 6063-T52 allowable bending stress
- Next by Subject: Re: aluminum welding
- Previous by thread: RE: OSHA 4-bolt anchorage
- Next by thread: Re: aluminum welding