Return to index: [Subject] [Thread] [Date] [Author]

Re: Backing Bars at CJP welds on Special Moment Frames Joints

[Subject Prev][Subject Next][Thread Prev][Thread Next]
You are better off removing the backing bar. It sounds like, in your case, the
top flange is obstructed!
Is something bearing upon it? Is this a retrofit?

LEDSTRUCTURES(--nospam--at)aol.com wrote:

> Backing Bars : remove after CJP welds are completed or leave in place?  If
> removed,  is it only the backing bar below the bottom flange that needs to be
> removed? If anyone has an answer, I would appreciate your response. Thanks
> SDB
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********