Return to index: [Subject] [Thread] [Date] [Author]

RE: IBC Wind end zone on hipped roof

[Subject Prev][Subject Next][Thread Prev][Thread Next]
In ASCE 7-98, ref. fig. 6-5b Components and Cladding (Pg. 46).  It indicates
that the "end zone" follows the slope and is measured parallel to the slope.

I know you're talking about MWFRS, but this is the only diagram I know of
that references hipped roofs.


-----
Jason Kilgore
Leigh & O'Kane, L.L.C.
(816) 444-3144
jkilgore(--nospam--at)leok.com


-----Original Message-----
From: Conrad Guymon [mailto:conrad(--nospam--at)karren.com]
Sent: Friday, March 15, 2002 3:40 PM
To: seaint(--nospam--at)seaint.org
Subject: IBC Wind end zone on hipped roof


I'm analyzing a custom home with a multiple hipped roof.  When applying the
IBC (or ASCE 7-98) wind provisions to a hipped roof for the main lateral
force resisting system, does the end zone extend vertically, or does the end
zone follow the slope of the roof along the hip?  If it follows the slope of
the roof, is the width measured horizontally, or perpendicular to the slope?

Looking at the diagrams supplied in the code, I'm getting the impression
that we've been given just a more complex way to analyze a box, with no
guidance for more complex structures.

Conrad Guymon, P.E.


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********