Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: steel brace

[Subject Prev][Subject Next][Thread Prev][Thread Next]
>Yes, for the descriptions provided it
>appears to be what you descrbe (i.e.
>half of a "chevron" type brace).

That kind of detail could get ugly quick in my opinion.

For SCBF, we have requirements that make V and inverted V braces robust to
minimize the potential for losing a diagonal (which makes a nice concentric
system eccentric). Then we have requirements for V and inverted V systems to
ensure that, if a diagonal is lost, the beam can carry gravity load and the
system does not destabilize. Seems like this configuration intentionally
starts at the point we have a bunch of provisions in there to avoid.

Perhaps it could be treated as an EBF, but there are aspect ratios for links
that must be satisfied. Also, a link adjacent to the column makes for a
system that places a higher inelastic rotation demand on the beam to column
moment connection than for the same interstory drift on a moment frame.
Again there are specific provisions to keep out of trouble. So you wind up
putting the link between the braces or really beefing up the moment

Can you configure the system another way? That may be the best solution (and
the simplest).


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at:
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*   Questions to seaint-ad(--nospam--at) Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: 
******* ****** ****** ****** ******* ****** ****** ********