Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Steel Roof Deck: Using wall panels

[Subject Prev][Subject Next][Thread Prev][Thread Next]
The products you are looking for are "Roof and Wall Panels", they are in 
Section 7 as opposed to "Metal Deck" that is in Section 5.  There are many 
manufacturers represented in Sweet's.

Roger C. Davis
Architect
SDS Architects, Inc.

-----Original Message-----
From:	Ron Hill [SMTP:ronhill(--nospam--at)hillce.com]
Sent:	Wednesday, July 31, 2002 2:19 PM
To:	Seaint@Seaint. Org
Subject:	Q:Steel Roof Deck: Using wall panels

I am evaluating several existing metal buildings.  They all have roof
decks with ribs at 12" o/c.  I have looked at SDI and they do not list a
roof deck with ribs this far apart.  Most ribs on roof decks are at 6"
o/c.  I have found several wall panels in catalogs with ribs at 12" o/c.

Is it typical for the builder to use wall panels for roof deck or is
there a roof panel available that has 12" spacing on the ribs??

TIA


Ronald A. Hill, P.E.
HILL Consulting Engineering
PO BOX 26525
Birmingham, Alabama 35260 USA
Phone: 205-823-4784
FAX: 205-823-4145
email: ronhill(--nospam--at)hillce.com
http:\\www.hillce.com




******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********