Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Load bearing exterior wall supporting the cladding

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Scott,
Type of cladding:
1- Concrete thin shell panels(composite with the wall's steel studs)
2- Glass Fiber Reinforced Concrete panels with Flex Anchors(rod or bar connecting the GFRC skin to steel studs)

Design loads are both wind and seismic(zone 3)

Thanks,
Reza Dashti


From: Scott Maxwell <smaxwell(--nospam--at)engin.umich.edu>
Reply-To: <seaint(--nospam--at)seaint.org>
To: seaint(--nospam--at)seaint.org
Subject: Re: Load bearing exterior wall supporting the cladding
Date: Tue, 13 Aug 2002 17:07:16 -0400 (EDT)

Reza,

This will largely be effected by the type of cladding being used, but also
the type of load to which you may be concerned with (i.e. wind or
seismic).  Some types of cladding are relatively immune to larger lateral
drift (i.e. low end metal siding) while others are very sensitive to
larger lateral drift (i.e. brick).  In additional to the cladding
material, the details of the cladding and cladding attachment will affect
the abilit of the cladding to accomidate lateral drift.

Thus, a little more information will be needed before anyone can really
offer any advice.  And even then, the value of the advice may be somewhat
limited depending on how you choose to detail the attachment of the
cladding.

HTH,

Scott
Ypsilanti, MI


On Tue, 13 Aug 2002, Reza Dashti Asl wrote:

>
> Hi,
> In a building with load bearing exterior steel stud walls, these studs are > also supporting the cladding. Is drift a concern for the cladding in this
> system?
>
> Reza Dashti, P.Eng.
> Vancouver
>
>
>
>
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
>
> ******* ****** ******* ******** ******* ******* ******* ***
> *   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
> *
> *   This email was sent to you via Structural Engineers
> *   Association of Southern California (SEAOSC) server. To
> *   subscribe (no fee) or UnSubscribe, please go to:
> *
> *   http://www.seaint.org/sealist1.asp
> *
> *   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
> *   send to the list is public domain and may be re-posted
> *   without your permission. Make sure you visit our web
> *   site at: http://www.seaint.org
> ******* ****** ****** ****** ******* ****** ****** ********
>


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
*
*   This email was sent to you via Structural Engineers
*   Association of Southern California (SEAOSC) server. To
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you
*   send to the list is public domain and may be re-posted
*   without your permission. Make sure you visit our web
*   site at: http://www.seaint.org
******* ****** ****** ****** ******* ****** ****** ********




_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com


******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* * This email was sent to you via Structural Engineers * Association of Southern California (SEAOSC) server. To * subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
* Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you * send to the list is public domain and may be re-posted * without your permission. Make sure you visit our web * site at: http://www.seaint.org ******* ****** ****** ****** ******* ****** ****** ********