Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

Re: Structural Stainless Steel

[Subject Prev][Subject Next][Thread Prev][Thread Next]
William and Eric,

Thanks for the input.  The system I will be designing does not use
cold-formed structural members, but pipe, angle and rod members.  The Nickel
Development Institute manual is the only one I've found that seems
appropriate.

Nels

Nels Roselund
Structural Engineer
South San Gabriel, CA
njineer(--nospam--at)att.net



******* ****** ******* ******** ******* ******* ******* ***
*   Read list FAQ at: http://www.seaint.org/list_FAQ.asp
* 
*   This email was sent to you via Structural Engineers 
*   Association of Southern California (SEAOSC) server. To 
*   subscribe (no fee) or UnSubscribe, please go to:
*
*   http://www.seaint.org/sealist1.asp
*
*   Questions to seaint-ad(--nospam--at)seaint.org. Remember, any email you 
*   send to the list is public domain and may be re-posted 
*   without your permission. Make sure you visit our web 
*   site at: http://www.seaint.org 
******* ****** ****** ****** ******* ****** ****** ********