Need a book? Engineering books recommendations...

Return to index: [Subject] [Thread] [Date] [Author]

RE: Cast-in-place Box Culvert Analysis and Design

[Subject Prev][Subject Next][Thread Prev][Thread Next]
Doug
 
Look at detail numbers D80 thru D86A
 
-----Original Message-----
From: THunt(--nospam--at)absconsulting.com [mailto:THunt(--nospam--at)absconsulting.com]
Sent: Wednesday, January 22, 2003 8:07 AM
To: seaint(--nospam--at)seaint.org
Subject: Re: Cast-in-place Box Culvert Analysis and Design


Doug,

You can access CALTRANS standards at the following web site.  Look for the box culvert drawings then look at the notes very carefully.  They will have some design parameters or will refer you to another drawing for this information.  I might also note that for the box culvert drawings (single and double) you need to study the rebar details very carefully as they can be very confusing if you have never used them before.

http://www.dot.ca.gov/hq/esc/oe/project_plans/HTM/stdplns-dual-new02.htm

ASTM used to have several standards for precast box culverts but they have been withdrawn.  They also had some good details and design notes.

Thomas Hunt, S.E.
ABS Consulting




"Doug Parker" <dparker10(--nospam--at)austin.rr.com>

01/21/2003 02:01 PM
Please respond to seaint

       
        To:        <seaint(--nospam--at)seaint.org>
        cc:        
        Subject:        Cast-in-place Box Culvert Analysis and Design



Does anyone have or know where I can find analysis and design information for cast-in-place box culverts?
 
Thanks in advance,
Doug